|
|
Powerboss Integra PBI 5.5
|
|
|
|
|
|
AT3003
|
PBI 5.5 Three Phase Intelligent Motor Controller
|
|
460
|
£ |
| plus | | TVA |
|
|
Powerboss Integra poate sa asigure numeroase beneficii de moment si de durata, si anume: Soft Start (pornirea in rampa, controlata a motorului), Optimizare, Soft Stop (oprirea in panta, controlata a motorului), Factor de Putere Imbunatatit, Consum Maxim Scazut, Fiabilitate Imbunatatita si Productie Sporita. Combinatia intre costurile de electricitate reduse semnificativ si randamentul sporit constituie o oferta de recuperare a investitiei foarte atractiva.
|
| Specificatii generale | | tip | POWERBOSS INTEGRA |
| reteaua de alimentare | 220 - 480V +6% / -15% | | consum | 5,5 kW / 11A | | temperatura de operare | -10 - +40C, Reduce kW Rating 2% per Deg C up to 50 C
-40 - +60 C - Storage Temperature | | umiditate de operare | <95% No condensation allowed | | dimensiuni (w x d x h) | 130 x 115 x 270 | | greutate | 3,5 kg | | garantie | 2 ani | | certificari | UL508C, CSA, EEC EN50082-2, EN55011, 73/23/EEC
Protection IP20 / Nema 1 | Starting Duty:
-2.5 X unit rating in amperes for 60 Sec
-3 X unit rating in
amperes for 30 Sec
-4 X unit rating in amperes for 10 Sec
-5.5 X unit rating in amperes for 5 Sec
Starts per Hour:
-12 evenly spaced starts per hour at the ‘Starting Duty’ ratings
Pedestal Voltage:
-25 – 80% of supply voltage 1% increments
Starting Current Limit:
-25 – 80% of the DOL starting current in 1% increments
Starting Current Time:
-0 – 255 in 1 Sec increments
Starting Torque:
-6 – 64% of the DOL starting torque in 1% increments
Kick Start Level:
-9 – 100% of the DOL starting torque in 1% increments
Kick Start Time:
-0.1– 25 Sec in 0.1 Sec increments
Ramp Up Time:
-0.5 – 255 Sec in 1 Sec increments
Ramp Down Time:
-0.5 – 120 Sec in 1 Sec increments
Step Down Voltage:
-100 - 30% Line voltage in 1% increments
Fault Detection:
-Shut down for loss of phase and short-circuit Thyristor
Cooling:
-Naturally cooled <42 amps, force cooled >53 amps
LED Indications:
-Power on, Run, Ramp up, Ramp down, Fault and
Optimising/Top of ramp
Relays:
-Run and Fault. Contact Rating 1.2kVA, 250V AC Max
Fan Voltage:
-110 or 220V as specified |
|
|
Home 
